Home | Leadership | Our Philosophy | Products | Brochures | Upgrades |
Customer Support | Contact Us | Field Service | Spare Parts | Info Request |
| The Technology | |||
| Technical Implementation | |||
| Soft-running ball bearings support the roll of film as the friction drive unrolls film from the reel. The splicing device immediately following the roll of film not only enables the film to be changed, but also minimizes the time required to change rolls. The bag containing the splice is not filled and is automatically removed. |  |
||
|
|
|||
| The film is pulled over a forming shoulder coated with a low-friction surface material and formed into a tube. One (1) Continuously heated sealing bar makes the vertical overlapping seal. Accurate temperature and pressure control ensure uniform seal quality. |  |
||
|
|
|||
| A built-in knife separates a package already filled from the tube. Two (2) electronically-controlled, continuously heated sealing bars seal the finished package and at the same time form the bottom seal for the next package. Intensive air-cooling permits the shortest possible cycle times. |  |
||
|
|
|||
| All functions of the machine are controlled by a Programmable Logic Controller (PLC). The operation and program management are activated using a color touch screen display with menu based control. Machine status and messages are displayed graphically and in plain text. Customized memory settings allow the customer to easily switch to different size packages. |  |
||
|
< Back |
|
| Packaging Systems International, Inc. 4990 Acoma St. Denver, CO 80216 | ||
| Phone 303-296-4445, Fax 303-298-1016, Parts 1-800-525-6110 | ||
| S Y S T E M S O L U T I O N S | ||
| Copyright 2007 Packaging Systems International Inc., all rights reserved. | ||
 ·
 ·
 ·
 |
||